How to Grease Locks (Doors and Padlocks)
Normally, locks last for seven years. Your locks should be frequently cleaned and lubricated to extend their lifespan. One of our most frequently asked questions is about how to properly lubricate locks. From garages to bikes to motorbikes, lock maintenance should be a crucial component of your security routine. In the app store, you can also purchase more affordable Lock Picking Sets.
Why Lock Maintenance Is Important
The safety of your family, home, and property depends on maintaining your locks. If your security measure breaks down and is no longer functional, whether it be a door lock, padlock, or garage guard, it serves as a clear invitation to criminals. You can guarantee your locks work effectively for as long as possible by keeping them in excellent condition. By extending the functional life of your security device, you will not only save money but you will also be actively preventing theft and maintaining the safety of your environment.
How to Grease Locks (Doors and Padlocks)
Perform routine maintenance
Blow the keyhole’s dust away. To remove the dust from the lock, use an air compressor or a can of pressurized air. Press the pressure button while keeping the nozzle near the lock hole to blow air through the lock mechanism.
Spray the opening and lock cylinder. The lock cylinder and opening should be cleaned using a spray cleaner, such as WD-40. In the keyhole, spray cleanser.
Use a dry lubricant to lubricate the lock. Use a dry lubricant to prevent dust from accumulating inside the lock. In the keyhole, dispense a dry-lock lubricant, such as 3-in-1 Dry-Lock Lube. To lubricate the lock, insert the key and move it around.
Use WD-40 as a temporary fix. Try using WD-40 if you need to open your lock quickly but are short on funds. Put some WD-40 in the keyhole. To place the WD-40 into the deadbolt, place the key into the lock’s keyhole, unlock it, and then lock it again. Just be aware that WD-40 will draw in dust and wind up discoloring your locks. It ought to only be used as a temporary fix.
Handles deep cleaning jobs
First, take apart the lock by removing the screws holding it to the door. The two screws holding the door handle in place as well as the screws holding the panel to the side of the door must be removed. The door handle and panel should be pulled out. To ensure that nothing is lost, place all the parts on a piece of cardboard or newspaper.
WD-40 can be used to thoroughly clean the lock. Use WD-40 or a spray cleaner to thoroughly clean the lock’s components. Remove any dust or filth from the panels, lock cylinders, door handles, and other components. Clear the lock of any leftover WD-40 or liquid cleaning.
Make sure you have a rag handy to absorb any spills if dirt or dust drips from the lock. Ensure that the keyhole and all other moving parts are clean.
Graphite lubricant should be used on the deadbolt’s whole surface. Make sure the lock’s whole interior is dry. After that, lubricate the lock’s components all over with graphite. Add some graphite to the cylinder and other moving parts, as well as the keyhole. Follow-up lubrication is less common with graphite lubricants.
Reattach the lock. Reinstall the latch bolt and panel on the door’s side. Place the exterior door handle there. Install the interior door handle after that. installed on the panel. Fix all screws firmly. Make sure everything happens as planned by turning the doorknob.
After using lubrication, if you still have difficulties locking your locks, you can get brand-new Lishi Lockpicks from the online store.